Horsepower Selective Herbicide
In Stock. Normally ships in 1 business day.
Horsepower Selective Herbicide is a highly concentrated formula which provides broad-spectrum control of broadleaf weeds. It is a three-way, selective post-emergent herbicide that contains Triclopyr as one of its active ingredient which is effective against hard-to-kill weeds such as chickweeds, dandelions, clover, knotweed, oxalis, plaintains, and more. It can be used for spot treatment on athletic fields, golf courses (fairways, aprons, and roughs), cemeteries, lawns (residential, industrial and institutional), parks, but most especially on 2,4-D sensitive areas. Horsepower can treat up to 4 acres per gallon.
- Horsepower Selective Herbicide – quart
- Horsepower Selective Herbicide – 2.5 gallon
* Non-restricted use in NY.
Note: Due to New California State restrictions, this Can Not be Sold in California.
Apply this product at the rate of 2 to 3 pints in 20 to 240 gallons of water per acre (0.73 to 1.10 fluid ounces in 0.5 to 5.5 gallons of water per 1,000 square feet) to control weeds growing in turf grasses planted to Bluegrass, Fescue, Rye, Bent (excluding golf course greens and tees), Bahia, Bermuda and Zoysia.
Herbi Controlled Droplet Applicator: Add 1-1/2 to 2-1/4 pints of this product to the 5 pint Herbi bottle, then fill with water to make 5 pints of mixture or substitute 1/2 pint of a surfactant for water while agitating the solution. While walking at approximately 1 pace (3 feet) per second, spray entire contents over 33,000 square feet (3/4 of an acre). Do not overlap at edge of spray patterns. Reduced rates must be applied when grass is stressed from heat, drought, etc.
Controlled Droplet Applicators - (CDA), Atomizers, and Spinning Disk Applicators: Use this product at the rate of 2 to 3 pints per acre (0.73 to 1.10 fl. oz. per 1,000 sq. ft.) in sufficient water to assure coverage (1 to 4 gallons of water per acre is normal for this type of equipment).
|Active Ingredients:||Dicamba, dimethylamine salt 4.82% MCPA, dimethylamine salt 48.99% Triclopyr, triethylamine salt 5.59%|
|Target Pests:||Alfalfa, Amaranth, Bindweed, Buffalobur, Chickweed, Clover, Dandelion, Dog Fennel, Field Pennycress, Fleabane, Geranium, Healall, Horseweed, Kochia, Lambsquarters, Lespedeza, Mallow, Morningglory, Oxalis, Pigweed, Plantain, Purslane, Ragweed and others|
|For use in:||Athletic Fields, Cemeteries, Golf Courses (Fairways, Aprons & Roughs), Lawns (Residential, Industrial & Institutional), Parks|
|Application:||Apply 2 to 3 pints in 20 to 240 gallons of water per acre (0.73 to 1.10 fluid ounces in 0.5 to 5.5 gallons of water per 1,000 square feet) * The maximum application rate is 3.2 pints per acre per year * See label for complete application instructions|
|NOT FOR SALE TO:||CA, FL, VT (Restricted To Licensed Applicators Only)|